Calculate material quantities and costs using your measurements and rates.
21 quick tools No layout neededPaint & preparation
Paint, primer and putty quantities from the surface area.
3 calculatorsTiles & skirting
Tiles, boxes and skirting pieces for floors and walls.
3 calculatorsWalls & plaster
Bricks, blocks, cement and sand from wall measurements.
6 calculatorsBoundary wall
Bricks, mortar, plaster and a pillar count reference.
Bricklaying
Masonry units and mortar in one calculation.
Brick walls
Brick count, wastage and cost from wall dimensions.
AAC blocks
AAC block count with a wastage allowance.
Brickwork mortar
Cement and sand for your mortar specification.
Plaster
Cement and sand from plaster area and thickness.
Electrical wiring
Rough wire, conduit and switchboard purchasing allowances.
1 calculatorPlumbing
Pipe route quantities, defined connections and optional fixture costs.
1 calculatorConcrete & site work
Check volumes, weights and formwork using your project’s specified dimensions.
6 calculatorsConcrete
Concrete volume and materials for a specified mix.
Cement, Sand (Ret / Badarpur) & Aggregate (Gitti / Rorri)
Split a specified mix into constituent quantities.
Rebar (Sariya / TMT)
Steel weight from specified bar sizes and lengths.
Structural members
Concrete, formwork and any supplied steel quantities.
Excavation (Khudai) & backfilling
Excavation and fill volumes from site dimensions.
Formwork (Shuttering)
Formwork contact area and sheet quantities.
Use your project’s specified dimensions, mixes and reinforcement. These tools calculate quantities only.